Marcellus Hose Products - Hammer Union
Marcellus Hose Products
Toll Free: 888-475-5988

Fax: 412-787-1727

sales@marcellushose.com

blankHome PageContact UsProducts TabCareer Informationblank
MenuStrip

Request A Quote
Vertical Menu Strip 1

Hose By Application
Tradeshow
Vertical Menu Strip
Request an Assembly

Vertical Strip
Click here to link to Powertrack International's full website.
Vertical Menu Strip 2

 

Hammer Unions

Home |> Hose By Application

"Providing Hose Products for the Marcellus Shale Region"

NEW! Hammer Union Conversion Adapters

Figure Number

Pressure Rating (PSI)

Nominal Pipe Size

Standard Service

Sour Gas Service

1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" 8" 10" 12"
Cold Working Test Cold Working Test
100 1000 1500 - -     X X X X X X X X    
200 2000 3000 - - X X X X X X X   X X X  
206 2000 3000 - - X X X X X X X   X X X  
207 2000 3000 - -           X X          
300 2000 3000 - -       X                
400 2500 3750 2500 3750               X X X X X
400 4000 6000 4000 6000       X   X X          
600 6000 9000 - -       X   X X          
602 6000 9000 6000 9000 X X X X X X X          
1002 10000 15000 7500 11250 X     X   X X X X      
1002 10000 15000 7500 11250             X          
1003 10000 15000 7500 11250           X X X        
1502 15000 22500 10000 15000 X   X X X X X X        
2202 - - 15000 22500       X   X            

 

Figure 100
Figure 100

-Cold working pressure is 1,000 psi
-Low pressure union. Manifold and general service.

Figure 200
Figure 200

-Cold working pressure is 2,000 psi
-General pupose union.
-Thread and butt weld ends.

Figure 206
Figure 206

-Cold working pressure is 2,000 psi
-O-ring in mental sub improves sealing and extends service life.
-Cup & cone provide zero clearance against extrusion.
-Threaded and butt weld ends.

Figure 207
Figure 207

-Cold working pressure is 2,000 psi
-Manifold and blanking the end of the line- O-ring cap provides leak-free seal-threaded and weld end.
-Connection cap can be tapped for pressure guage or value.

Figure 300
Figure 300

-Cold working pressure is 2,000 psi
-Flat face design for straight breakout of connected components such as valves or fittings for repair or inspection.
-Moderate vacuum service insulating unions available upon request.

Figure 400
Figure 400

-Cold working pressure is 4000 psi for 2" through 4" sizes. 5" through 12" sizes- cold working pressure is 2,500 psi
-Primarily used for manifold pumping and mud.

Figure 600
Figure 600

-Cold working pressure is 6,000 psi
-Used for steam service, well servicing, and boiler connection.
-Primary seal is bronze to prevent corrosion and absorb expansion and contraction.

Figure 602
Figure 602

-Cold working pressure is 6,000 psi
-Lip-type elastomer seal protects metal-to-metal seal and seal design reduces turbulence in the line.
-Used primarily in manifold and mud service.
-Available with non-pressure thread sealing.

Figure 1002
Figure 1002

-Cold working pressure is 10,000 psi for 1" through 4" sizes. 5" and 6" sizes - cold working pressure is 7,500 psi.
-Feild replacement lip type elastomer seal protects secondary metal-to-metal seal.

Figure 1003
Figure 1003

Cold working pressure for 10,000 psi for 2" through 3" sizes. 4" and 5" sizes- cold working pressure is 7500 psi
-These misaligning unions are used in high pressure applications where the lines are not aligmed.
-7" line misaligned accepted.

Figure 1502
Figure 1502

-Cold working pressure is 15,000 psi
-Used primarily in choke/ kill lines, cementing, fracturing, and testing.
-Available in threadad welded, butt welded and non pressure thread sealing ends.

Figure 2202
Figure 2202

-Cold working pressure is 15,000 psi
-Used in sour gasservices -Meets Nace MR-01-75 standards
-Butt weld only
-pained green for easy identification.

 

Request A Quote Products Request A Hose Assembly Products

Have a question? Contact us!
888-475-5988